[. . . ] 2 Connect the supplied power adaptor cord (or the car adaptor) to the player and AC mains (or the car cigarette lighter outlet) to start charging. [. . . ] Your remote control is now ready for use. 5 Press the SOURCE key repeatedly (or DOCK on the remote) for dock input. SOURCE To recharge your iPod player: Case 1: In the power-off mode, you just need to connect the DVD player to AC mains or the car cigarette lighter outlet. Case 2: In the power-on mode, make sure the current source of the DVD player is "DOCK" before proceeding as described in case 1. 5 To remove the iPod player 1 Pull out the iPod connector. 2 Lift up the handle marked / EJECT to release. 2, 3 OR 3 Enjoy (iPod with video) Connecting and using your iPod player 2 1 1 Notes: ­ You can also connect the supplied power adaptor cord (or the car adaptor) to the player and AC mains (or the car cigarette lighter outlet) directly wherever possible. Please consult your dealer. ) TIP: ­ When connecting a device to the AV IN socket on the DVD player, you need to press the source key repeatedly on the front panel (or AV on the remote) to select A/V IN (AUX). 3 1 Open the lid of the player and adjust the swivel screen clockwise to your preferred viewing angle. 4 Remove the protective card (if any) and load a disc with the label side facing up. 6 To stop playback, press 9 on the remote control. Headphone Connecting an SD/MMC card 1 Insert an SD/MMC card into the SD CARD slot with the metal contact facing down. 2 On the DVD player panel, press the source key repeatedly (or SD/MMC CARD on the remote). [. . . ] 2 On the DVD player panel, press the source key repeatedly (or SD/MMC CARD on the remote). [. . . ]